Saturday, October 26, 2019
Teaching Experiences And Observations From School Placements Education Essay
Teaching Experiences And Observations From School Placements Education Essay Part 1 As described by Learning Teaching Scotland (LTS), the Assessment is for Learning programme is made up of three forms of assessment; Assessment as Learning, which involves learning about how to learn Assessment for Learning which involves continuously using assessment to support classroom learning and teaching in order for pupils to progress effectively and is a formative approach, and Assessment of Learning (AoL) which involves assessing pupils at the end of a topic or course to find out what learning has or has not taken place. It is a summative approach which ultimately uses grading to provide data and make judgements about the learner and the school. LTS represent these forms of assessment as a triangle which also shows the relationship between the curriculum, learning and teaching and assessment. AfL represents a change in the traditional model of school assessment, which previously has been the idea that the only desirable outcome form education was the achievement of top grades (summative assessment). Modern approaches such as AfL aims to encourage pupils to learn in a deep, constructivist manner (Cohen et al., 2004, p300) and not merely surface learning which occurs when teaching to the test (Bryce, 2009 Lecture ). The Assessment is for Learning programme is essentially trying to get teachers to do less AoL and more AfL (Bryce, 2011 Lecture). LTS have based this idea upon the work of Paul Black and Dylan Wiliam. They documented their research on formative assessment in Inside the Black Box (London: Kings College, 1998). In this paper, the authors describe formative assessment as: activities undertaken by teachers and by their students in assessing themselves, which provide information to be used as feedback to modify the teaching and learning activities in which they are engaged (Pe 8) From this it can be understood that formative assessment involves the teacher and the pupil interpreting their teaching and learning and providing feedback to one another. This feedback is then used as an indication as to how to proceed with the lesson or how to improve on previous work and learning. Therefore, assessment is not just about how well the pupils DID, it is about how they ARE doing and how to improve further. I will now discuss examples from my own teaching experiences and observations from my placement school where AfL and successful teaching approaches were very much embedded into the lessons of all year groups. During both placements, I observed several teachers sharing the learning objectives with the class using the We Are Learning To method. I observed that this method was commonly used with S1 and S2 classes and less frequently S3 upwards. I implemented this method into all my classes, from 1st to 4th year, and although this method does not appear to be an effective assessment tool as the outcomes are being introduced before any teaching has taken place, by referring to the outcomes during and at the end of the lesson ensures that both teacher and pupil are clear that the learning journey is on the right track (Simpson, 2006, p64). Therefore, teachers are challenged to constantly assess whether the pupils have learnt the intended objectives. By referring to the objectives at the end and asking pupils to what they felt they had achieved or learnt helped me to assess whether the objectives I had written up were in fact achievable, whether the lesson activities helped to meet the objective s or were too numerous, as I had been over optimistic in what I aimed to achieve in a lesson. Reflection and evaluating my teaching is vital to ensure that appropriate and effective learning is taking place at all times. Kerry (2004) supports this idea: Master teachers share learning outcomes to assess whether the learning journey is on the right track and whether it is on target to reach its destination (p100) By referring to the objectives at the end of the lesson, also helped me to gauge the learning of my pupils and check for areas of difficulty because in my experience pupils who understood the lesson could relate this to the learning objective and likewise, pupils who did not understand key areas could relate this to the outcome they could not meet. Asking for pupil feedback not only allowed me to assess their learning but helped me with planning for the next lesson and its starter, because in some cases I had to go over certain key points again. An example of this was where pupils fed back to me that they did not understand what the term niche meant. This was a learning objective, thus next lesson, I went over the term again, and provided further examples but also asked them to carry out a matching exercise requiring to match the niche with the organism. When I got feedback from the class again they were all able to successfully state the definition of niche. I would revisit the LOs at the end of the lesson, followed by a question and answer session involving all pupils, however, I didnt always have as much time as I needed for the QA, so I used a method I observed other teachers use, which was request feedback from the class by asking them to write down anything they were unsure about or did not understand as well as what they had learnt, on a post-it-note and stick it on the board before leaving. Other forms of effective feedback I observed included the thumbs method in which thumbs were raised if pupils were happy with the work; thumbs were halfway showing slight concern and thumbs were fully down if the pupil was struggling. By asking the entire class to do this the teacher was able to evaluate the progress of the whole class and if there were problems they were dealt with then, during that lesson. I also observed the use of and used myself mini whiteboards as a method of whole class evaluation. I found it invaluable, not just for a change in pupil activity but as a useful assessment tool and also an effective method of getting the whole class to answer as opposed to a dominate few. During this placement, I carried out formative marking of homework with all my classes, using comments only. Ian smith (2003) states: Marks with comments do not enable students to improve, yet comments on their own do This suggests that when pupils are presented with both marks and comments pupils will focus solely on the marks regardless of whether the mark was good or poor, thus ignoring the information that will help them improve. Black and Harrison (2004) suggest that the type of feedback provided must be beneficial to pupils and enable them to move forward thus the 2 stars and a wish method was used to highlight areas that where the pupils had done (positive reinforcement) and any area that could be improved upon and how this could be improved upon (next steps and targets). Although I told the classes to read their feedback or answer any questions I had left, when I took the jotters in to mark the next piece of homework, not all the pupils had completed the previous works questions or found the answers to questions they had missed out. I think one of the reasons for this is that when I handed back the jotters, most pupils put them away, I should have given the pupils time in class to read the comments and if they had any questions they had the opportunity to ask. Part 2 In this section, I will first discuss the conflict between formative assessment (AfL) and summative assessment (AoL). I will then discuss how grades can be used constructively within schools based upon observations and school experience. Summative assessment and the giving of grades have always had a dominant role in the education system, particularly in the upper school. In fact, such assessment has been derogatively termed Assessment is for Grades (Bryce, 2008, pg 581) indicating as mentioned in section one, that there is a common view that the only worthwhile outcome of school is good grades. This contrasts greatly with the view of Black and Wiliam who wish to move away from grades and use the formative approach of comments only feedback. The authors state in Inside the Black Box (London: Kings College, 1998) that the giving of marks and the grading functions are over emphasised, while the giving of useful advice and the learning function are under-emphasised. The educational research and literature have shown the benefits of formative assessment, such as promoting deeper learning for all pupils through good quality interactions and feedback on how best to improve. This is not the case however, when grades and summative assessment is used. Wiliam (2008) argues that when pupils do a piece of work, the teacher marks it and if that piece of work gets an A, the pupil gets to keep that grade A even if they subsequently forget everything they ever knew about that topic. The effect of this attitude and teachers only teaching to the test encourages a very shallow approach to the curriculum where teachers and students skate across the surface and everyone feels good because of the grade achieved, however, the pupil does not accumulate any knowledge. This type of pupil attitude was seen frequently on placement from 1st years having sat their end of topic to tests, to 3rd years having sat their Unit 1 NAB. There were some pupils in each of these classes and the first thing they did was look at their mark and sighed with relief because they had passed. This was particularly evident in the 2 3rd year classes who had just sat their NABs. I found some pupils were happy with the pass and did not care about where they went wrong because they passed. It is this mentality of the grade is what is important that must be changed. Using a formative approach gets pupils to take responsibility for their learning and to want to better their knowledge as opposed to just scrape by. Wiliam (1998) has defended the use of comments marking and interestingly though, pupils who just sat a test, NAB or their 4th year prelim, because only grades were given back to pupils, most enquired as to why certain marks were not given, or what exactly was wrong with the answer they wrote down. This highlighted to me, the importance of comments, because there will be some pupils who rely on the feedback to improve, but the challenge is to get all pupils to want to learn how to improve. Additionally, I also observed grades and final marks de-motivate pupils. Once pupils got their results, they immediately compared marks with each other. For those pupils who had failed their NAB or test, instant disappointment and this is another problem with summative assessment. Low ability pupils and pupils who frequently receive low marks expect and face constant disappointment when they get their results back. Pupils, who have often experienced failure, will not expose themselves to any further failure. Therefore, they do not possess the will to succeed and do well, consequently affecting their progress in school (Kyriacou, 2001). Furthermore, summative assessments are not wholly reliable as I believe them to be a snapshot of how students performed on the day in an exam or test and does not fully reflect overall student progress and performance. The grades achieved are over-interpreted by parents too who, from observations made whilst sitting in on parents evening, solely focus on the grade as opposed to pupil development. Parents of S2 pupils were consistently asking what level their child would be sitting in 3rd and 4th year and in some cases argued that Intermediate 1 was not appropriate and they wanted their child to sit intermediate 2, even though the pupils in question were happy to be sitting Int 1 because they struggled with science. Schools are constantly being compared with each other in league tables, and the media and the government can easily make their comparisons and produce literature based on summative assessment forms. This is more difficult to do with other forms of assessment. Summative assessments can produce data which is relied upon by employers and other educational institutes to see what skills pupils have developed; thus showing that grades and results will be an integral part of the school system. Although I think that there are problems with grading, mainly the effect on pupil attitude and motivation, I do not believe summative assessments should be abolished. AfL promotes the development of learning I think after the hard work in classes where pupils have recognised their strengths and weaknesses and tried to improve, they should have the right to gain a recognised qualification. Despite the negative views on grading and summative assessment I believe it can be used constructively and in a formative role to promote wider and deeper learning. Whilst on placement I observed an innovative approach to going through prelims with senior classes. The teacher I observed used an approach which I imitated with one of my own classes. The teacher asked the pupils to work in pairs and on the mini whiteboards create a marking scheme for section A (multiple choice). Effectively, the pupils were re-doing the prelim, but they had the opportunity to discuss and learn from one another before marking their efforts using the marking scheme. The next lesson the teacher split the class into groups. Each table had a set of questions from section B of the prelim and they had to work together to create another marking scheme for the specific questions, before rotating round to the next table and working through those questions. Once pupils had completed all the questions, the teacher went through the answers, and groups marked their efforts. When I questioned the class, they all told me they knew where they had gone wrong in the prelim and they knew what mistakes not to make again. The peer support helped them feel more confident as they discussed how they interpreted the questions as well as compared methods and answers. Typically with a test or prelim, the teacher would go through each question and give the answers, but this simply bores and de-motivates the pupils. However, this class teacher had turned a summative assessment into a real active learning opportunity for the pupils. There is clearly some overlap between the 2 forms of assessment as it is AfL which will, in effect, help pupils to achieve better grades when AoL takes place. Thus, finding a balance between the approaches, mainly using summative assessment formatively, can be an effective tool for developing successful learners. Part 3a Within section 3a I shall identify some of the positive features of the Standard Grade and Intermediate courses, as well as indicate the differences in assessment structure between the 2 courses. Standard Grades (SG) replaced Ordinary Grades in the 1980s after the school leaving age was raised to 16. It was felt that Ordinary grades were only suitable for 30% of the school population, thus SGs were proposed to help meet the needs of those pupils now required to stay in school (Bryce, 2008). Simpson (2006) states: The introduction of Standard Grades led to a much bigger proportion of the cohort than previously, gaining qualifications and in a wider range of subjects. This shows that SGs fulfilled their intended purpose, providing a course that was achievable for all. One reason for this is the advantage of having three SG levels, thus accommodating all levels of ability. More able pupils can be pushed, whilst less able pupils have material they can cope with but also have an opportunity to achieve the higher of the two levels, since SG candidates are represented at two levels, Credit/General or General/Foundation, thus providing a good motivator. This aspect contrasts greatly with Intermediate courses, since pupils doing Intermediate 1/2 are all the same level, and this can lead to classes with a wide range of abilities. This was evident in my placement school, where S3 and S4 pupils sat Intermediate courses. The mixed level of ability was diverse and also caused concern since any pupil who was not coping could not simply be placed down a level because the Intermediate 1 and Intermediate 2 courses were very different in Biology. Thus, teachers had to determine what was best for the pupil whether it was a case of maturity, or risk pupils being put in Intermediate 1, and them having to catch up a years worth of work. Furthermore, SGs are always taught over 2 years. Thus providing both teachers and pupils enough time to fully comprehend the topic and focus more on learning rather than assessment. Schools which run SG courses mean that the Intermediate courses are taught over one year and as seen in my first placement school, there is added pressure for the teacher to get through the required material, thus learning and teaching opportunities may missed due to time constraints. Additionally, there is more chance of teachers teaching to the test. In my second placement however, as the Intermediate 2 courses ran the same length as SG courses, I observed that the extra time was highly beneficial and likewise, allowed for more creative and active lessons, as well as AfL approaches. The assessment of the 2 courses is very different also. SGs are externally assessed, although some subjects like English require a portfolio which contributes to the grade. Intermediate courses however, are both internally and externally assessed, and are very similar in structure to Higher Still, thus enabling continuity when pupils move on. Pupils are required to sit National Assessment Banks (NAB) at the end of every section in the course. This can be stressful for pupils as they are sitting several Intermediates, so will have to sit several NABs and can have the feeling of being NABd to death (Bryce, 2011). Teachers also have an increased workload and paperwork with quality marking of the NABs. The increase in assessment in Intermediates can also de-motivate pupils should they fail, but also because NABs are pitched at level C so depending on their mark they may feel apprehensive about the exams. However, there is an opportunity to re-assess pupils, since NABs can be re-sat. In additional to differences in internal assessment, the external assessment of both courses are very different and distinct advantages. As mentioned, the SG candidates have the opportunity to sit two levels, thus aim for the higher of the two, however, this means that SG pupils will be sitting at least 16 exams. This can cause a lot of pressure for pupils. Whereas, for Intermediate courses there is only 1 exam per subject, thus this can encourage pupils to do the best that they can as it is one opportunity. With SG, pupils have a safety net with the lower level; however, Intermediate pupils dont have that. Instead if pupils do fail, they will have their NABs recognised by the SQA. The last difference in terms of assessment is the grading of each course. Intermediate grading system of A-C has no limit for pupils, where as SG grading system is 1-7 and pupils sitting General/Foundation are limited in their possible grade, as the highest they can achieve is a 3. Part 3b At the moment pupils taking 8 SGs currently sit more than 20 hours of examinations, which exceed most universities Honours diet of examinations (Souter, 2008, pg 445). Thus, the argument that current school pupils are being over-assessed is well understood. A CfE aims to address this issue with the proposed National 4 and National 5 qualifications. The focus on these assessments is to promote greater breadth and depth of learning, including a greater focus on the secure development of skills and knowledge (LTS, 2011) Although CfE has been implemented officially in schools this year, with the current S1; these new qualifications will not be sat until session 2013/14. National 4 is based at SCQF level 4 and will replace Intermediate 1 and general level SG, whilst National 5 is based at SCQF level 5 and will replace Intermediate 2 and credit level SG. However, the main development of these new qualifications is that national 4 will be internally assessed by schools Teachers will continually assess pupils through coursework and at the end of the course, pupils will be awarded either a pass or a fail. National 5 on the other hand will be both internally assessed by the school, but also externally assessed by the SQA at the end of the course. For pupils, the National 4 strategy will ease the pressure and stress which accumulates with exams. However, for teachers and schools alike, there will be a definite increase in the workload for both all qualifications, not only in marking but by creating assessments. All internal assessments must be valid in that the tests must assess what is supposed to be tested and is a fair representation of pupils knowledge, skills and abilities. Assessments must also be reliable in that they must be consistent in marking and of standards. (Cohen et al., 2004, pg 331335). Currently, 13,500 of the 58,500 (23%) total school population leave school with qualifications at the time pupils will have sat their National 4 level assessment. Therefore, although by no means a majority, this number of pupils will leave school at this time without ever having sat an externally assessed exam. As well as this, the government will have to provide sufficient and adequate information on the new qualifications for both employers and parents. With just a pass or fail, employers may not rely on the National 4 and will need further evidence to show how well pupils actually did. School reports or portfolios of coursework and assessments for pupils may need to be provided; again this will add to the ever-increasing workload of teachers. Furthermore, parents will need to be both fully onboard with the new qualifications and understand their purpose. Intermediates have been in place in school for several years, yet during parents evening I observed many parents still seeking clarification as to what these qualifications actually are and asking for comparisons compared to O Grades and GCSEs. Thus information for parents is vital, not only so that they are aware of the changes that their children will face but also so that they too can support them at home. Regular feedback and reports of pupil progress will have to be given to parents, throughout National 4 and 5 courses. Although the new proposals will reduce the assessment burdens for pupils considerably and provide opportunities for deeper more meaningful learning, I believe that teachers will need to be properly supported throughout the introduction of these qualifications. Thus, they can then focus on creating effective learning and teaching experiences which will develop the skills and abilities of all their pupils, so that they can leave school as effective contributors, successful learners, confident individuals and responsible citizens. Word Count: 3,873
Thursday, October 24, 2019
Tragedy In Genesis Essay -- Genesis Tragedies Tragedy Essays
Tragedy In Genesis People tend to view tragedy in cataclysmic and catastrophic terms. Every night on the news we hear murders, assassinations and bombings referred to as Atragedies.@ Tragedy need not be an event which affects the community at large. Rather, any event which teaches an important lesson to a specific person or a group of people can be viewed as a type of tragedy. While the Greek tragedies focused upon the catastrophic nature of tragedy, The Biblical Book of Genesis provides the reader with another tragic paradigm. Genesis describes tragic events which are neither catastrophic nor transforming. In fact, according to the Genesetic paradigm, tragedy need not end in death. Before entering into a detailed discussion of Genesis, we must attempt to define the term tragedy itself. Walter Kaufmann defines tragedy in an almost scientific kind of way. To him, every tragedy must fit into exactly the same mold in precisely the same fashion. He writes: tragedy is (1) a form of a literature that (2) presents a symbolic action as performed by actors and (3) moves into the center immense human suffering (4) in such a way that it brings to our minds our own forgotten and repressed sorrows as well as those of our kin and humanity (5) releasing us with some sense (a) that suffering is universal- not a mere accident in our experience, (b) that courage and endurance in suffering or nobility in despair are admirable- not ridiculous- and usually also ( c) that fates worse than our own can be experienced as exhilarating Kaufmann=s definition precludes seeing the notion of tragedy through a wider lens. His definition is all encompassing and requires many factors in order to be considered a tragedy. To him, very few writings are true tragedies. A tragedy must end in death (Aimmense human suffering@) for it to be included within the canon of tragedy. Seemingly, tragedy could not occur within the mundane as Kaufmann emphasizes that it must be a form of literature and performed by actors. Without suffering, a work of literature cannot be considered tragedy. Kaufmann=s definition was shaped by the works of Sophocles and Euripides. Although there were three primary tragedy writers in antiquity, Kaufmann does not seem to be able to cope with alternative modes of tragedy as expressed by Aeschylus. Instead of accepting the concept of dual definitions or para... ...c thing that could have happened to Jacob. Jacob responds to the news by Atearing his clothing, placing a sack across his loins and mourning for his son many days. All of the siblings attempted to comfort their father, but he would not be comforted. He said: I will go to my grave a mourner.@ It would seem that catastrophic tragedy has befallen the house of Jacob. However, the Aaudience@ is aware of certain factors which are not apparent to Jacob. Jacob really believes that his son is dead. At the same time that Jacob feels immense loss, Joseph is blessed with wealth and power in Egypt. As in all other Genesetic plays, positive experiences stem out of negative actions. The brothers had intended Joseph to be sold into slavery and he rises to become the Viceroy of the land. In fact, the Bible states that: AGod was with Joseph and he became a successful person in the house of the Egyptian.@ Act three opens with the meeting of Joseph and his brothers. They are accused of smuggling goods out of the country and are brought in front of the Viceroy. Since several years had passed and Joseph had matured, they did not recognize him. He asked them if they had any other brothers at home.
Wednesday, October 23, 2019
Investigatory Project ââ¬Å Kaymito Leaves Decoction as Antiseptic Mouthwash ââ¬Â Essay
Introduction 1.1 Problem Statement Fractures are prevalent in natural and synthetic structural media, even in the best engineered materials. We find fractures in bedrock, in sandstone aquifers and oil reservoirs, in clay layers and even in unconsolidated materials (Figures 1.1 to 1.4). Fractures are also common in concrete, used either as a structural material or as a liner for storage tanks (Figure 1.5). Clay liners used in landfills, sludge and brine disposal pits or for underground storage tanks can fracture, releasing their liquid contents to the subsurface (Figure 1.6). Even ââ¬Å"flexibleâ⬠materials such as asphalt fracture with time (Figure 1.7). The fact that fractures are inevitable has led to spending billions of research dollars to construct ââ¬Å"safeâ⬠long-term (10,000 years or more) storage for high-level nuclear waste (Savage, 1995; IAEA, 1995), both to determine which construction techniques are least likely to result in failure and what are the implications of a failure, in terms of release to the environment and potential contamination of ground water sources or exposure of humans to high levels of radioactivity. Why do materials fail? In most cases, the material is flawed from its genesis. In crystalline materials, it may be the inclusion of one different atom or molecule in the structure of the growing crystal, or simply the juncture of two crystal planes. In depositional materials, different grain types and sizes may be laid down, resulting in layering which then becomes the initiation plane for the fracture. Most materials fail because of mechanical stresses, for example the weight of the overburden, or heaving (Atkinson, 1989; Heard et al., 1972). Some mechanical stresses are applied constantly2 until the material fails, others are delivered in a sudden event. Other causes of failure are thermal stresses, drying and wetting cycles and chemical dissolution. After a material fractures, the two faces of the fracture may be subject to additional stresses which either close or open the fracture, or may subject it to shear. Other materials may temporarily or permanently deposit in the fracture, partially or totally blocking it for subsequent fluid flow. The fracture may be almost shut for millions of years, but if the material becomes exposed to the surface or near surface environment, the resulting loss of overburden or weathering may allow the fractures to open. In some cases, we are actually interested in introducing fractures in the subsurface, via hydraulic (Warpinski, 1991) or pneumatic fracturing (Schuring et al., 1995), or more powerful means, to increase fluid flow in oil reservoirs or at contaminated sites. Our particular focus in this study is the role that fractures play in the movement of contaminants in the subsurface. Water supply from fractured bedrock aquifers is common in the United States (Mutch and Scott, 1994). With increasing frequency contaminated fractured aquifers are detected (NRC, 1990). In many cases, the source of the contamination is a Non-Aqueous Phase Liquid (NAPL) which is either in pools or as residual ganglia in the fractures of the porous matrix. Dissolution of the NAPL may occur over several decades, resulting in a growing plume of dissolved contaminants which is transported through the fractured aquifer due to natural or imposed hydraulic gradients. Fractures in aquitards may allow the seepage of contaminants, either dissolved or in their own phase, into water sources. Fluid flow in the fractured porous media is of significance not only in the context of contaminant transport, but also in the production of oil from reservoirs, the generation of steam for power from geothermal reservoirs, and the prediction of structural integrity or failure of large geotechnical structures, such as dams or foundations. Thus, the results of this study have a wide range of applications. The conceptual model of a typical contaminant spill into porous media has been put forward by Abriola (1989), Mercer and Cohen (1990), Kueper and McWhorter (1991) and Parker et al. (1994). In some cases, the contaminant is dissolved in water and thus3 travels in a fractured aquifer or aquitard as a solute. Fractures provide a fast channel for widely distributing the contaminant throughout the aquifer and also result in contaminant transport in somewhat unpredictable directions, depending on the fracture planes that are intersected (Hsieh et al., 1985). More typically a contaminant enters the subsurface as a liquid phase separate from the gaseous or aqueous phases present (Figure 1.8). The NAPL may be leaking from a damaged or decaying storage vessel (e.g. in a gasoline station or a refinery) or a disposal pond, or may be spilt during transport and use in a manufacturing process (e.g. during degreasing of metal parts, in the electronics industry to clean semiconductors, or in an airfield for cleaning jet engines). The NAPL travels first through the unsaturated zone, under three-phase flow conditions, displacing air and water. The variations in matrix permeability, due to the heterogeneity of the porous medium, result in additional deviations from vertical flow. If the NAPL encounters layers of slightly less permeable materials (e.g. silt or clay lenses, or even tightly packed sand), or materials with smaller pores and thus a higher capillary entry pressure (e.g. NAPL entering a tight, water-filled porous medium), it will tend to flow mostly in the horizontal direction until it encounters a path of less resistance, either more permeable or with larger pores. Microfractures in the matrix are also important in allowing the NAPL to flow through these lowpermeability lenses. When the NAPL reaches the capillary fringe, two scenarios may arise. First, if the NAPL is less dense than water (LNAPL, e.g. gasoline, most hydrocarbons), then buoyancy forces will allow it to ââ¬Å"floatâ⬠on top of the water table. The NAPL first forms a small mound, which quickly spreads horizontally over the water table (Figure 1.9). When the water table rises due to recharge of the aquifer, it displaces the NAPL pool upward, but by that time the saturation of NAPL may be so low that it becomes disconnected. Disconnected NAPL will usually not flow under two-phase (water and NAPL) conditions. Connected NAPL will move up and down with the movements of the water table, being smeared until becomes disconnected. If the water table goes above the disconnected NAPL, it will begin to slowly dissolve. NAPL in the unsaturated zone will4 slowly volatilize. The rates of dissolution and volatilization are controlled by the flow of water or air, respectively (Powers et al., 1991; Miller et al., 1990; Wilkins et al., 1995; Gierke et al, 1990). A plume of dissolved NAPL will form in the ground water, as well as a plume of volatilized NAPL in the unsaturated zone. If the NAPL is denser than water (DNAPL, e.g. chlorinated organic solvents, polychlorinated biphenyls, tars and creosotes), then once it reaches the water table it begins to form a mound and spread horizontally until either there is enough mass to overcome the capillary entry pressure (DNAPL into a water saturated matrix) or it finds a path of less resistance into the water-saturated matrix, either a fracture or a more porous/permeable region. Once in the saturated zone, the DNAPL travels downward until either it reaches a low enough saturation to become disconnected (forming drops or ââ¬Å"gangliaâ⬠) and immobile, or it finds a low-permeability layer. If the layer does not extend very far, the DNAPL will flow horizontally around it. In many cases, the DNAPL reaches bedrock (Figure 1.10). The rock usually contains fractures into which the DNAPL flows readily, displacing water. The capillary entry pressure into most fractures is quite low, on the order of a few centimeters of DNAPL head (Kueper and McWhorter, 1991). Flow into the fractures continues until either the fracture becomes highly DNAPL saturated, or the fracture is filled or closed below, or the DNAPL spreads thin enough to become disconnected. The DNAPL may flow into horizontal fractures within the fracture network. In terms of remediation strategies, DNAPLs in fractured bedrock are probably one of the most intractable problems (National Research Council, 1994). They are a continuous source of dissolved contaminants for years or decades, making any pumping or active bioremediation alternative a very long term and costly proposition. Excavation down to the fractured bedrock is very expensive in most cases, and removal of the contaminated bedrock even more so. Potential remediation alternatives for consideration, include dewatering the contaminated zone via high-rate pumping and then applying Soil Vapor Extraction to remove volatile DNAPLs, or applying steam to mobilize and volatilize the DNAPL towards a collection well. An additional option is to use5 surfactants, either to increase the dissolution of DNAPL or to reduce its interfacial tension and thus remobilize it (Abdul et al., 1992). An issue with remobilizing via surfactants is the potential to drive the DNAPLs further down in the aquifer or bedrock, complicating the removal. If an effective remediation scheme is to be engineered, such as Soil Vapor Extraction, steam injection or surfactant-enhanced dissolution or mobilization, we need to understand how DNAPLs flow through fractures. Flow may be either as a solute in the aqueous phase, as two separate phases (DNAPL-water) or as three phases (DNAPL, water and gas, either air or steam). Another complication in any remediation scheme, not addressed in this study, is how to characterize the fracture network. Which are the fractures that carry most of the flow? What is their aperture and direction? What is the density of fracturing in a particular medium? Are the fractures connected to other fractures, probably in other planes? How does one sample enough of the subsurface to generate a good idea of the complexity involved? Some techniques are beginning to emerge to determine some of the most important parameters. For example, pumping and tracer tests (McKay et al., 1993; Hsieh et al., 1983) may provide enough information to determine the mean mechanical and hydraulic aperture of a fracture, as well as its main orientation. Geophysical techniques like seismic imaging, ground-penetrating radar and electrical conductivity tests are being improved to assist in the determination of fracture zones (National Research Council, 1996). However, there is room for significant improvement in our current ability to characterize fractures in the subsurface. Even if we come to understand how single and multiphase flow occurs in a fracture, and the interactions between the fracture and the porous matrix surrounding it, how do we describe all these phenomena in a modeling framework? Clearly, we cannot describe every fracture in a model that may consider scales of tens, hundreds or thousands of meters in one or more directions. One approach is to consider the medium as an ââ¬Å"equivalent continuumâ⬠(Long, 1985), where the small-scale properties are somehow averaged in the macroscopic scale. Probably the best solution for averaging properties is to use a stochastic description of properties such as permeability (or6 hydraulic conductivity) including the effect of fractures on overall permeability, diffusivity, sorption capacity, grain size, wettability, etc. Another approach, first developed in the petroleum industry, is to consider a ââ¬Å"dual porosity/dual permeabilityâ⬠medium (Bai et al., 1993; Zimmerman et al., 1993; Johns and Roberts, 1991; Warren and Root, 1963), referring to the porosity and permeability of the matrix and the fracture. Diffusive or capillary forces drive the contaminants, or the oil and its components, into or out of the matrix, and most advective flow occurs in the fractures. None of these models has yet been validated through controlled experiments. 1.2 Research Objectives The objectives of this research are: à · To characterize the fracture aperture distribution of several fractured porous media at high resolution; à · To study the transport of a contaminant dissolved in water through fractured media, via experimental observation; à · To study the physical processes involved in two- and three-phase displacements at the pore scale; à · To observe two- and three-phase displacements in real fractured porous media; à · To bring the experimental observations into a modeling framework for predictive purposes. 1.3 Approach7 To understand single and multiphase flow and transport processes in fractures, I first decided to characterize at a high level of resolution the fracture aperture distribution of a number of fractured rock cores using CAT-scanning. With this information, I determined the geometry and permeability of the fractures, which I then use to construct a numerical flow model. I also use this information to test the validity of predictive models that are based on the assumed statistics of the aperture distribution. For example, stochastic models (Gelhar, 1986) use the geometric mean of the aperture distribution to predict the transmissivity of a fracture, and show that the aperture variance and correlation length can be used to predict the dispersivity of a solute through a fracture. These models have not been, to my knowledge, been tested experimentally prior to this study. I compare these theoretical predictions of fracture transmissivity and dispersivity of a contaminant, with experimental results, both from the interpretation of the breakthrough curve of a non-sorbing tracer and from CAT-scans of the tracer movement through the fractured cores. To study multiphase displacements at the pore scale, we use a physical ââ¬Å"micromodelâ⬠, which is a simile of a real pore space in two dimensions, etched onto a silicon substrate. The advantage of having a realistic pore space, which for the first time has the correct pore body and pore throat dimensions in a micromodel, is that we can observe multiphase displacements under realistic conditions in terms of the balance between capillary and viscous forces. I conduct two- and three-phase displacements to observe the role that water and NAPL layers play in the mobilization of the various phases. The micromodels are also used to study the possible combinations of double displacements, where one phase displaces another which displaces a third phase. The pore scale observations have been captured by Fenwick and Blunt (1996) in a threedimensional, three-phase network model which considers flow in layers and allows for double displacements. This network model then can produce three-phase relative permeabilities as a function of phase saturation(s) and the displacement path (drainage, imbibition or a series of drainage and imbibition steps).8 In addition, I use the fracture aperture information to construct capillary pressuresaturation curves for two phase (Pruess and Tsang, 1990) and three phases (Parker and Lenhard, 1987), as well as three-phase relative permeabilities (Parker and Lenhard, 1990). The fracture aperture distribution is also an input to a fracture network model which I use to study two-phase displacements (drainage and imbibition) under the assumption of capillary-dominated flow. To observe two- and three-phase displacements at a larger scale, in real fractured cores, I use the CAT-scanner. I can observe the displacements at various time steps, in permeable (e.g. sandstones) and impermeable (e.g. granites) fractured media, determining the paths that the different phases follow. These observations are then compared with the results of the network model as well as with more conventional numerical simulation. 1.4 Dissertation Overview The work is presented in self-contained chapters. Chapter 2 deals with the high resolution measurement and subsequent statistical characterization of fracture aperture. Chapter 3 uses the fracture aperture geostatistics to predict transmissivity and diffusivity of a solute in single-phase flow through a fracture, which is then tested experimentally. We also observe the flow of a tracer inside the fracture using the CAT-scanner, and relate the observations to numerical modeling results. Chapter 4 presents the theory behind the flow characteristics at the pore scale as well as the micromodel observations of two- and three-phase flow. In Chapter 5, twophase flow in fractured and unfractured porous media is presented, comparing CATscanned observations of various two-phase flow combinations (imbibition, drainage and water flooding) against numerical modeling results. Chapter 6 presents three-phase flow9 in fractures, comparing numerical results against CAT-scanner observations. Finally, Chapter 7 considers the engineering relevance of these studies. 1.5 References Atkinson, B. K., 1989: Fracture Mechanics of Rock, Academic Press, New York, pp. 548 Abdul, A. S., T. L. Gibson, C. C. Ang, J. C. Smith and R. E. Sobczynski, 1992: Pilot test of in situ surfactant washing of polychlorinated biphenyls and oils from a contaminated site, Ground Water, 30:2, 219-231 Abriola, L.,: 1989: Modeling multiphase migration of organic chemicals in groundwater systems ââ¬â A review and assessment, Environmental Health Perspectives, 83, 117-143 Bai, M., D. Elsworth, J-C. Roegiers, 1993: Multiporosity/multipermeability approach to the simulation of naturally fractured reservoirs, Water Resources Research, 29:6, 1621-1633 Fenwick, D. H. and M. J. Blunt: 1996, Three Dimensional Modeling of Three Phase Imbibition and Drainage, Advances in Water Resources, (in press) Gelhar, L. W., 1986: Stochastic subsurface hydrology: From theory to applications., Water Resources Res., 22(9), 1355-1455. Gierke, J. S., N. J. Hutzler and J. C. Crittenden, Modeling the movement of volatile organic chemicals in columns of unsaturated soil, Water Resources Research, 26:7, 1529-1547 Heard, H. C., I. Y. Borg, N. L. Carter and C. B. Raleigh, 1972: Flow and fracture of rocks, Geophysical Monograph 16, American Geophysical Union, Washington, D. C. Hsieh, P. A., S. P. Neuman, G. K. Stiles and E. S. Simpson, 1985: Field determination of the threedimensional hydraulic conductivity of anisotropic media: 2. Methodology and application to fracture rocks, Water Resources Research, 21:11, 1667-1676 Hsieh, P. A., S. P. Neuman and E. S. Simpson, 1983: Pressure testing of fractured rocks- A methodology employing three-dimensional cross-hole tests, Report NUREG/CR-3213 RW, Dept. of Hydrology and Water Resources, University of Arizona, Tucson, AZ 85721 IAEA, 1995: The principles of radioactive waste management, International Atomic Energy Agency, Vienna Johns, R. A. and P. V. Roberts, 1991: A solute transport model for channelized flow in a fracture. Water Resources Res. 27(8): 1797-1808. Kueper, B. H. and D. B. McWhorter, 1991: The behavior of dense, nonaqueous phase liquids in fractured clay and rock, Ground Water, 29:5, 716-728 Long, J. C. S., 1985: Verification and characterization of continuum behavior of fractured rock at AECL Underground Research Laboratory, Report BMI/OCRD-17, LBL-14975, Batelle Memorial Institute, Ohio McKay, L. D., J. A. Cherry and R. W. Gillham, 1993: Field experiments in a fractured clay till, 1. Hydraulic conductivity and fracture aperture, Water Resources Research, 29:4, 1149-1162 Mercer, J. W. and R. M. Cohen, 1990: A review of immiscible fluids in the subsurface: properties, models, characterization and remediation, J. of Contaminant Hydrology, 6, 107-163 Miller, C. T., M. M. Poirier-McNeill and A. S. Mayer, 1990: Dissolution of trapped nonaqueous phase liquids: mass transfer characteristics, Water Resources Research, 26:11, 2783-2796 Mutch, R. D. and J. I. Scott, 1994: Problems with the Remediation of Diffusion-Limited Fractured Rock Systems. Hazardous Waste Site Soil Remediation: Theory and Application of Innovative Technologies. New York, Marcel Dekker, Inc. National Research Council, 1994: Alternatives for ground water cleanup, National Academy Press, Washington, D. C. National Research Council, 1996: Rock Fracture and Fracture Flow: Contemporary Understanding and Applications, Committee on Fracture Characterization and Fluid Flow, National Academy Press, Washington, D. C. (in press). Parker, J. C. and R. J. Lenhard, 1987: A model for hysteretic constitutive relations governing multiphase flow: 1. Saturation-pressure relations, Water Resources Research, 23:12, 2187-219610 Parker, J. C. and R. J. Lenhard, 1990: Determining three-phase permeability-saturation-pressure relations from two-phase system measurements, J. Pet. Sci. and Eng., 4, 57-65 Parker, B. L., R. W. Gillham and J. A. Cherry, 1994: Diffusive disappearance of immiscible-phase organic liquids in fractured geologic media, Ground Water, 32:5, 805-820 Powers, S. E., C. O. Loureiro, L. M. Abriola and W. J. Weber, Jr., 1991: Theoretical study of the significance of nonequilibrium dissolution of nonaqueous phase liquids in subsurface systems, Water Resources Research, 27:4, 463-477 Pruess, K. and Y. W. Tsang, 1990: On two-phase relative permeability and capillary pressure of roughwalled rock fractures, Water Resources Research, 26:9, 1915-1926 Reitsma, S. and B. H. Kueper, 1994: Laboratory measurement of capillary pressure-saturation relationships in a rock fracture, Water Resources Research, 30:4, 865-878 Savage, D., 1995: The scientific and regulatory basis for the geological disposal of radioactive waste, John Wiley, New York Schuring, J. R., P. C. Chan and T. M. Boland, 1995: Using pneumatic fracturing for in-situ remediation of contaminated sites, Remediation, 5:2, 77-90 Norman R. Warpinski, 1991: Hydraulic fracturing in tight, fissured media, SPE 20154, J. Petroleum Technology, 43:2, 146-209 Warren , J. E. and P. J. Root, 1963: The behavior of naturally fractured reservoirs, Soc. Pet. Eng. J., 3, 245-255 Wilkins, M. D., L. M. Abriola and K. D. Pennell, 1995: An experimental investigation of rate-limited nonaqueous phase liquid volatilization in unsaturated porous media: Steady state mass transfer, Water Resources Research, 31:9, 2159-2172 Zimmerman, R. W., G. Chen, T. Hadgu and G S. Bodvarsson, 1993: A numerical dual-porosity model with semianalytical treatment of fracture/matrix flow, Water Resources Research, 29:7, 2127-2137
Tuesday, October 22, 2019
Quejarse Conjugation in Spanish, Translation, Examples
Quejarse Conjugation in Spanish, Translation, Examples The Spanish verbà quejarseà means to complain. Quejarse is conjugated as a regularà -arà verb, like casarseà orà ducharse.à This article includes the conjugations forà quejarseà in the present, past and future indicative, the present and past subjunctive, the imperative, and other verb forms. How to Use Quejarse Althoughà quejarseà includes the reflexive pronounà se, it is not a reflexive verb. Instead, it is a pronominal verb. These verbs are always used with the reflexive pronouns (me, te, se, nos os, se), but the reflexive pronoun has no function except to accompany the verb. This means that pronominal verbs like quejarse cannot be used without the reflexive pronouns. For example, to say He complains to his boss, you need to sayà Ãâ°l se queja con su jefe,à you would never sayà à ©l queja, without the pronounà se. Quejarse Present Indicative For the verb quejarse, remember to always include the reflexive pronoun before the conjugated verb. Yo me quejo I complain Yo me quejo del calor. T te quejas You complain T te quejas del fro. Usted/l/ella se queja You/he/she complains Ella se queja por el mal servicio. Nosotros nos quejamos We complain Nosotros nos quejamos cuando estamos enfermos. Vosotros os quejis You complain Vosotros os quejis con el gerente del restaurante. Ustedes/ellos/ellas se quejan You/they complain Ellos se quejan por cualquier cosa. Quejarse Preteriteà Indicative The preterite is one of the two past tenses in Spanish. It is used to talk about completed actions in the past. Yo me quej I complained Yo me quej del calor. T te quejaste You complained T te quejaste del fro. Usted/l/ella se quej You/he/she complained Ella se quej por el mal servicio. Nosotros nos quejamos We complained Nosotros nos quejamos cuando estuvimos enfermos. Vosotros os quejasteis You complained Vosotros os quejasteis con el gerente del restaurante. Ustedes/ellos/ellas se quejaron You/they complained Ellos se quejaron por cualquier cosa. Quejarseà Imperfectà Indicative The other past tense in Spanish is theà imperfect tense, which can be translated as was complaining or used to complain.à The imperfect is used to talk about repeated or ongoing actions in the past. Yo me quejaba I was complaining Yo me quejaba del calor. T te quejabas You were complaining T te quejabas del fro. Usted/l/ella se quejaba You/he/she was complaining Ella se quejaba por el mal servicio. Nosotros nos quejbamos We were complaining Nosotros nos quejbamos cuando estbamos enfermos. Vosotros os quejabais You were complaining Vosotros os quejabais con el gerente del restaurante. Ustedes/ellos/ellas se quejaban You/they were complaining Ellos se quejaban por cualquier cosa. Quejarse Futureà Indicative To conjugate the future tense, start with the infinitive of the verb, and add the future tense endings (à ©, s, , emos, à ©is, n). Yo me quejar I will complain Yo me quejar del calor. T te quejars You will complain T te quejars del fro. Usted/l/ella se quejar You/he/she will complain Ella se quejar por el mal servicio. Nosotros nos quejaremos We will complain Nosotros nos quejaremos cuando estemos enfermos. Vosotros os quejaris You will complain Vosotros os quejaris con el gerente del restaurante. Ustedes/ellos/ellas se quejarn You/they will complain Ellos se quejarn por cualquier cosa. Quejarse Periphrastic Futureà Indicative In aà periphrastic construction, there are several words that make up a verb form. The periphrastic future is formed with the present tense conjugation of the verb ir (to go), the preposition a,à and the infinitive of the verb. Yo me voy a quejar I am going to complain Yo me voy a quejar del calor. T te vas a quejar You are going to complain T te vas a quejar del fro. Usted/l/ella se va a quejar You/he/she is going to complain Ella se va a quejar por el mal servicio. Nosotros nos vamos a quejar We are going to complain Nosotros nos vamos a quejar cuando estemos enfermos. Vosotros os vais a quejar You are going to complain Vosotros os vais a quejar con el gerente del restaurante. Ustedes/ellos/ellas se van a quejar You/they are going to complain Ellos se van a quejar por cualquier cosa. Quejarse Conditionalà Indicative Yo me quejara I would complain Yo me quejara del calor. T te quejaras You would complain T te quejaras del fro. Usted/l/ella se quejara You/he/she would complain Ella se quejara por el mal servicio. Nosotros nos quejaramos We would complain Nosotros nos quejaramos si estuviramos enfermos. Vosotros os quejarais You would complain Vosotros os quejarais con el gerente del restaurante. Ustedes/ellos/ellas se quejaran You/they would complain Ellos se quejaran por cualquier cosa. Quejarse Present Progressive/Gerund Form To form the present participe or gerundà for -arà verbs, you need the ending -ando.à The present participle can beà used to form progressive verb forms such as the present progressive.à Present Progressive of Quejarse se est quejando She is complaining Ella se est quejando por el mal servicio. Quejarseà Past Participle To form the past participle for -arà verbs, you need the ending -iendo.à The past participle can be used to form compound tenses, such as the present perfect.à Past Participle of Quejarse se ha quejadoà She has complained Ella se ha quejado por el mal servicio. Quejarse Present Subjunctive Theà subjunctive moodà is used when a sentence containsà a main clause and a secondary clause with a different subject in each clause, and it communicates doubt, desire, emotion, probabilities, or other subjective situations. Que yo me queje That I complain Julia pide que yo me queje del calor. Que t te quejes That you complain Orlando pide que t te quejes del fro. Que usted/l/ella se queje That you/he/she complain Mayra quiere que ella se queje por el mal servicio. Que nosotros nos quejemos That we complain La enfermera espera que nosotros nos quejemos cuando estemos enfermos. Que vosotros os quejis That you complain Briana pide que vosotros os quejis con el gerente del restaurante. Que ustedes/ellos/ellas se quejen That you/they complain Esteban espera que ellos se quejen por cualquier cosa. Quejarse Imperfectà Subjunctive The imperfect subjunctiveà has two different conjugations, which are equally acceptable. Option 1 Que yo me quejara That I complained Julia peda que yo me quejara del calor. Que t te quejaras That you complained Orlando peda que t te quejaras del fro. Que usted/l/ella se quejara That you/he/she complained Mayra quera que ella se quejara por el mal servicio. Que nosotros nos quejramos That we complained La enfermera esperaba que nosotros nos quejramos cuando estbamos enfermos. Que vosotros os quejarais That you complained Briana peda que vosotros os quejarais con el gerente del restaurante. Que ustedes/ellos/ellas se quejaran That you/they complained Esteban esperaba que ellos se quejaran por cualquier cosa. Option 2 Que yo me quejase That I complained Julia peda que yo me quejase del calor. Que t te quejases That you complained Orlando peda que t te quejases del fro. Que usted/l/ella se quejase That you/he/she complained Mayra quera que ella se quejase por el mal servicio. Que nosotros nos quejsemos That we complained La enfermera esperaba que nosotros nos quejsemos cuando estbamos enfermos. Que vosotros os quejaseis That you complained Briana peda que vosotros os quejaseis con el gerente del restaurante. Que ustedes/ellos/ellas se quejasen That you/they complained Esteban esperaba que ellos se quejasen por cualquier cosa. Quejarse Imperativeà The imperative moodà is for giving commands or orders. You will notice that the positive and negative commandsà are slightly different in theà tà ºÃ and vosotros conjugations. Also, you will notice that the placement of the reflexive pronoun is different in the positive and negative commands. The reflexive pronoun is placed between theà adverbà noà and the verb in negative commands, but it is attached at the end of the verb in positive commands.à Positive Commands T qujate Complain! Qujate del fro! Usted qujese Complain! Qujese por el mal servicio! Nosotros quejmonos Lets complain! Quejmonos cuando estemos enfermos! Vosotros quejaos Complain! Quejaos con el gerente del restaurante! Ustedes qujense Complain! Qujense por cualquier cosa! Negative Commands T no te quejes Dont complain! No te quejes del fro! Usted no se queje Dont complain! No se queje por el mal servicio! Nosotros no nos quejemos Lets not complain! No nos quejemos cuando estemos enfermos! Vosotros no os quejis Dont complain! No os quejis con el gerente del restaurante! Ustedes no se quejen Dont complain! No se quejen por cualquier cosa!
Subscribe to:
Posts (Atom)